Our webstore uses cookies to offer a better user experience and we recommend you to accept their use to fully enjoy your navigation.

auto air colors airbrushing

Airbrush acrylic colors for Auto Air, are indicated to work or semi-rigid surfaces.

Read more
  • auto air aluminium bases

    auto air aluminium bases

    <p>Actual aluminum-flake colors often used as base for 4600 Series Candy Colors.<br /> Highly reflective - more so than 4300 Series silvers.<br /> Best applied over 4002 Sealer Dark or an underlying coat of Auto Air, not direct to the substrate.<br /> Aluminum Bases are may require a longer period to cure than what is required for most other Auto Air Colors due to coating used to prevent aluminum from gassing.<br /> Use of mid-coat prior to aggressive masking for graphics may prevent peeling. <br /> Mid-coat may be of a urethane inter-coat clear or Auto Air 4004 Transparent Base.<br /> Use of mid-coat may not be necessary, especially if Aluminum Base Colors are thoroughly cured.<br /> Intended for application with a spray gun or large tip-sized airbrush.</p>
  • auto air semi opaque

    auto air semi opaque

    <p>Graphic colors intended for base colors and large applications where complete coverage is desired. Best applied over a 4000 Sealer. Most colors applied over 4001 Sealer White for a brighter value. Apply Deep Black and darker colors over 4002 Sealer Dark. Not intended for fine, detailed artwork with a small tip-sized airbrush. Contains fillers for opacity which prevent fine atomization at reduced pressures. Use as a color-keyed base for 4500 Series Sparklescent Color or 4300 Series Pearlescent Color. Semi- Opaque base reduces the amount of material required for a pearlized finish as the pearl color covers quicker in fewer coats than when used as a base color. Color- keying a base with a more expensive pearl mid-coat not only saves material, but it also reduces curing times. Excess coats of a pearl color applied as a base color for coverage require over a white sealer require a longer drying period than a few light coats over a Semi-Opaque base color. On average, Semi-opaque Colors dry faster than do 4300 and 4500 Series Colors due to the higher solids content in the Semi-Opaque Colors. Intended for application with a spray gun or large tip-sized airbrush. Spray-Gun: 1.2mm tip Mini-Spray Gun: 1.0mm tip Airbrush: 0.35mm or larger Reduce: Spray-gun: @ 10% per volume with Auto Air 4012 / Wicked W500 High Performance Reducer Airbrush: @ 30% per volume or more with Auto Air 4012 / Wicked W500 High Performance Reducer</p>
  • auto air transparents

    auto air transparents

    <p>Airbrush acrylic colors for Auto Air Transparent, are indicated to work or semi-rigid surfaces. Also can be used to color the 4001 sealer Sealer White. Because of its low density have a good performance with all kinds of steps nozzle. Used to dilute 4012 Flash Reducer High Performance, airbrushes 10 to 25%, pistols 5 to 10%. If you want a more transparent finish colors use the Auto Air Candy. Before applying color, primed with sealer to 4001 Sealer White white background to black background Black Sealer 4002. <br /><br /> Spray-Gun: 1.2mm tip<br /> Mini-Spray Gun: 1.0mm tip<br /> Airbrush: 0.35mm or larger</p>
  • auto air fluorescents

    auto air fluorescents

    <p>Auto Air Fluorescents Colors should be applied over a white base or like colour to achieve the shades shown on our colour chips.</p>
  • auto air pearlized

    auto air pearlized

    <p>Vivid pearl base coat colors which cover as a semi-opaque. <br /><br /> Best applied over 4001 Sealer White or 4002 Sealer Dark. Full coverage requires 3 - 4 coats over sealer base.<br /><br /> Lighter colors are best over Sealer White. 4308 Pearl Blue, 4311 Pearl Plum, 4312 Pearl Purple and 4314 Pearl Black may be applied over either although applying over 4002 Sealer Dark increases the color's reflective effect.<br /><br /> Apply 4302 Pearl Silver over either Sealer Dark or a grey sealer made by mixing Sealer White &amp; Dark.<br /><br /> 4301 Pearl White has an almond cast. For a clean, white pearl, use 4001 Sealer White top-coated with 3 - 4 coats of 4501 Hot Rod Sparkle White. <br /><br /> Spray-Gun: 1.2mm tip<br /> Mini-Spray Gun: 1.0mm tip<br /> Airbrush: 0.35mm or larger<br /> Reduce: Spray-gun: @ 10% per volume with Auto Air 4012 / Wicked W500 High Performance Reducer<br /> Airbrush: @ 30% per volume or more with Auto Air 4012 / Wicked W500 High Performance Reducer</p>
  • auto air metallic

    auto air metallic

    <p>Metallic base coat colors which cover as a semi-opaque.<br /><br /> Best applied over 4001 Sealer White or 4002 Sealer Dark. Full coverage requires 3 - 4 coats over sealer base.<br /><br /> Lighter colors are best applied over 4001 Sealer White. Except for 4330 &amp; 4331 Metallic Whites, all Metallic Colors may also be applied over 4002 Sealer Dark for a darker hued color with more reflection. 4340 Metallic Midnight Blue is best applied over 4002 Sealer Dark. Apply 4332 Metallic Silver over either Sealer Dark or a grey sealer made by mixing Sealer White &amp; Dark. <br /><br /> Metallic Colors make excellent bases for 4600 Series Candy Colors. 4331 Metallic White (coarse) is used for many of the lighter 4600 Series Candy- Pigment color references.<br /><br /> 4330 &amp; 4331 Metallic Whites are a blue-cast metallic white. For a clean, white pearl, use 4001 Sealer White top-coated with 3 - 4 coats of 4501 Hot Rod Sparkle White. Metallic Burnt Orange has a weaker covering strength than other Metallic Colors. Applying over a tinted sealer base made by mixing 4001 Sealer White with either 4205 Flame Orange or 4233 Transparent Orange greatly improves coverage. <br /><br /> Spray-Gun: 1.2mm tip<br /> Mini-Spray Gun: 1.0mm tip<br /> Airbrush: 0.35mm or larger<br /> Reduce: Spray-gun: @ 10% per volume with Auto Air 4012 / Wicked W500 High Performance Reducer<br /> Airbrush: @ 30% per volume or more with Auto Air 4012 / Wicked W500 High Performance Reducer</p>
  • auto air iridescent

    auto air iridescent

    <p>Shimmering base coat colors with a slight color shift from direct to side-cast cast views.<br /><br /> Colors cover semi-opaque. Full coverage requires 3 - 4 coats over sealer base.<br /><br /> Iridescent Colors are made with 4400 Series Hi-Lite Interference Colors which create the slight color-shift. Colors often travel to a darker hue on the side-cast view.<br /><br /> Lighter colors are best applied over 4001 Sealer White. 4355 Brite Blue, 4356 Electric Blue and 4358 Purple are best applied over 4002 Sealer Dark.<br /><br /> Spray-Gun: 1.2mm tip<br /> Mini-Spray Gun: 1.0mm tip<br /> Airbrush: 0.35mm or larger<br /> Reduce: Spray-gun: @ 10% per volume with Auto Air 4012 / Wicked W500 High Performance Reducer<br /> Airbrush: @ 30% per volume or more with Auto Air 4012 / Wicked W500 High Performance Reducer</p>
  • auto air gem color-shift

    auto air gem color-shift

    <p>Large pearl-flakes in a transparent base which have a color-shift.<br /> Applied as a mid-coat color over a black base. Best applied over 4220 Deep Black.<br /> Excellent coverage. 2 quarts is often enough material to paint a large vehicle.<br /> Color-shift not pronounced until top-coat clear applied. <br /> Color-key with select 4500 Series Sparklescent Colors for perfect, true ghosted graphics which are readily visible on direct-views and disappear into the base coat on side-cast views. Refer to Sparklescent Chart on page XX for color keys.<br /> Applied over different base colors, Gem Colors create very unique and beautiful pearl finishes.<br /><br /> Spray-Gun: 1.2mm tip<br /> Mini-Spray Gun: 1.0mm tip<br /> Airbrush: 0.35mm or larger<br /> Reduce: Spray-gun: @ 10% per volume with Auto Air 4012 / Wicked W500 High Performance Reducer<br /> Airbrush: @ 30% per volume or more with Auto Air 4012 / Wicked W500 High Performance Reducer</p>
  • auto air flair color-shift

    auto air flair color-shift

    <p>Multiple color-shifting base colors.<br /> Applied over 4002 Sealer Dark or 4220 Deep Black base.<br /> Intended for application with a spray gun or large tip-sized airbrush.<br /><br /> Spray-Gun: 1.2mm tip<br /> Mini-Spray Gun: 1.0mm tip<br /> Airbrush: 0.35mm or larger<br /> Reduce: Spray-gun: @ 10% per volume with Auto Air 4012 / Wicked W500 High Performance Reducer<br /> Airbrush: @ 30% per volume or more with Auto Air 4012 / Wicked W500 High Performance Reducer</p>
  • auto air hi-lite interference

    auto air hi-lite interference

    <p>Accent pearl-flakes with a slight color shift from the respective color to nothing on the side-cast view.<br /> Apply over any base color for slight pearl accents.<br /> Use sparingly. A little of this color goes a long way. For example, one quart will be enough for an entire mid-coat on a full size SUV. One or two dust coats is all that is required. If too much material is applied, the color turns to a pastel and the effect is lost. <br /> Colors are concentrated. Extending color by mixing with 4004 Auto Air Transparent Base adds more base, which allows for an easier application when painting large areas. <br /> Hi-Lite Blue over 4330 &amp; 4331 metallic White is a killer accent, especially over contoured surfaces such as flared fenders. Use very sparingly for this to work well. <br /> Hi-Lite Gold is a great accent pearl to most colors, especially 4301 Pearl White. Use very sparingly.<br /> A test panel is strongly recommended to determine finish and amount of Hi-Lite Color required for accent. Hi- Lite's effects not visible until after top-coat clear is applied. <br /> Applied over 4002 Sealer Dark or 4220 Deep Black base.<br /> Spray-Gun: 1.2mm tip<br /> Mini-Spray Gun: 1.0mm tip<br /> Airbrush: 0.35mm or larger<br /> Reduce: Spray-gun: @ 10% per volume with Auto Air 4012 / Wicked W500 High Performance Reducer<br /> Airbrush: @ 30% per volume or more with Auto Air 4012 / Wicked W500 High Performance Reducer</p>
  • auto air hot rod sparkle

    auto air hot rod sparkle

    <p>Large pearl-flakes with a superb orientation and powerful pearl-effects.<br /> Pearl-flakes are in a transparent binder and are applied as a mid-coat over a base, most often black.<br /> Excellent coverage. 2 quarts is often enough material to paint a large vehicle.<br /> 4501 Hot Rod Sparkle White is a transparent pearl-flake which color-keys with any color making it a universal pearl- flake for the entire line.<br /> 3 - 4 coats of 4501 Hot Rod Sparkle White over 4001 Sealer White is the cleanest, most brilliant pearl white in the Auto Air Colors line.ine.<br /> Extra coats of clear is required to bridge over pearl-flakes. <br /> Intended for application with a spray gun or large tip-sized airbrush.<br /><br /> Spray-Gun: 1.2mm tip<br /> Mini-Spray Gun: 1.0mm tip<br /> Airbrush: 0.35mm or larger<br /> Reduce: Spray-gun: @ 10% per volume with Auto Air 4012 / Wicked W500 High Performance Reducer<br /> Airbrush: @ 30% per volume or more with Auto Air 4012 / Wicked W500 High Performance Reducer</p>
  • auto air cosmics sparkles

    auto air cosmics sparkles

    <p>Shimmering base coat colors with a slight color shift from direct to side-cast cast views. <br /> Colors cover semi-opaque. Full coverage requires 3 - 4 coats over sealer base.<br /> Iridescent Colors are made with 4400 Series Hi-Lite Interference Colors which create the slight color-shift. Colors often travel to a darker hue on the side-cast view.<br /> Lighter colors are best applied over 4001 Sealer White. 4355 Brite Blue, 4356 Electric Blue and 4358 Purple are best applied over 4002 Sealer Dark. <br /><br /> Spray-Gun: 1.2mm tip<br /> Mini-Spray Gun: 1.0mm tip<br /> Airbrush: 0.35mm or larger<br /> Reduce: Spray-gun: @ 10% per volume with Auto Air 4012 / Wicked W500 High Performance Reducer<br /> Airbrush: @ 30% per volume or more with Auto Air 4012 / Wicked W500 High Performance Reducer</p>
  • auto air sparklescents

    auto air sparklescents

    <p>Extremely pearlescent, candied colors with tremendous depth - these are the best pearl colors available in any paint system without a doubt.<br /> They not only great pearl effects but they have a hue shift over contoured surface and changes in direct to side- cast views, creating a "candied" finish.<br /> Best used as a mid-coat color over a color keyed base color or tinted 4001 Sealer White. <br /> Sparklescent Colors are translucent and require on average 5 - 6 coats when applied over a white base. <br /> Use as a mid-coat over a color-keyed base reduces the number of coats on average to 2 - 3 coats and allows each coat to be applied lighter which decreases curing time.<br /> Sparklescent Colors are a mix of the 4200 Series Transparent Colors, 4400 Series Gem Colors and a 4500 Series Cosmic or Hot Rod Sparkle Color.<br /> Use of a Gem Color as a graphic color over the Sparklescent Colors creates a perfect ghosted graphic color. <br /> Refer to chart for color combinations - Auto Air Colors Blend Chart.<br /> Extra coats of clear is required to bridge over pearl-flakes in Sparklescent Colors.<br /> Bada Bling Silver(TM) is a very transparent silver which is great for blending and transitions.<br /> For use as a base color over large areas, mix 1:2 with 4332 Metallic Silver for improved coverage.<br /> Mango(TM) is a very transparent orange and needs to be applied over a base of 4205 Flame Orange when painting large surfaces.<br /> Intended for application with a spray gun or large tip-sized airbrush.<br /><br /> Spray-Gun: 1.2mm tip<br /> Mini-Spray Gun: 1.0mm tip<br /> Airbrush: 0.35mm or larger<br /> Reduce: Spray-gun: @ 10% per volume with Auto Air 4012 / Wicked W500 High Performance Reducer<br /> Airbrush: @ 30% per volume or more with Auto Air 4012 / Wicked W500 High Performance Reducer</p>
  • auto air candy pigment

    auto air candy pigment

    <p>Concentrated - Reduce Candy Pigment 3:1 Auto Air 4012 / Wicked W500 High Performance Reducer<br /> Candy - Pigments are transparent colors used for mid-coats over 4100 or 4300 Series Colors or as airbrush color. Colors are pigment- based, transparent colors, not dye-based, minimizing bleeding.<br /> Candied effect observed after top-coat, gloss clear applied. <br /> Add 4501 Hot Rod sparkle White to any Candy - Pigment for pearl-flake candy color. <br /><br /> Spray Gun: 1,2 mm.<br /> Mini-Gun: 0,8-1,0 mm.<br /> Airbrush: 0,5 mm.<br /><br /> Reduce: 4012 High Performance Reducer<br /> Spray Gun: 9:1<br /> Airbrush 3:1</p>
  • auto air candy 2 O

    auto air candy 2 O

    <p>Brilliant transparent colors for custom refinishing and airbrushing. Candy2 O combine advanced water-soluble, urethane resin technology with crystal-clear dyes to create truly exceptional candy colors.<br /><br /> PROPERTIES:<br /><br /> - Concentrate. Add 10% per volume (9:1 mix ratio) 4030 Intercoat for spray performance. Optional lowering of viscosity is achieved by reducing with either 4012 High Performance or 4020 Automotive Reducer.<br /><br /> - Intense. 4 - 6 medium wet coats are recommended for full color saturation. Allow each coat to air dry tack free prior; approximately 10 minutes flash time in between coats when painting in non-humid, temperate conditions.<br /><br /> - Made for the graphic arts with excellent adhesion so they will not lift or peel when taped on. Apply 4030 Intercoat direct over air- driedcandy2O to prevent bleeding when applying other colors and marking when taping.<br /><br /> - Work with a wide variety of spray-gun and airbrushes. The following specs are recommended as a starting point. As always, achieving a finely atomized spray pattern is the goal. Reduce and adjust settings &amp; psi to achieve a spray pattern that is smooth and free of large, color droplets or a grainy over-spray look.<br /><br /> spray-gun: 1.2 - 1.3mm tip, 25 - 35 psi<br /><br /> mini-gun: 0.8 - 1.0mm, 25 - 35 psi<br /><br /> airbrush: 0.5mm - mixing with 4030 generally enough, smaller tip- sizes reduce with 4012 High Performance or 4020 Automotive Reducer as needed to achieve optimum atomization.</p>
  • auto air additives

    auto air additives

    <p>Wide range of complementary products for Auto-Air.<br /> How to use,  click on the product.</p>
  • auto air sets

    auto air sets

    <p>Airbrush acrylic colors for Auto Air, are indicated to work or semi-rigid surfaces.</p>

Menu

Settings