Reference: ABTP414
€4.05
(VAT incl.)
Modelling Pigments AK Interactive ABT 502.
AK INTERACTIVE
Out-of-StockSold out
Reference: ABTP415
€4.05
(VAT incl.)
Modelling Pigments AK Interactive ABT 502.
Reference: ABTP416
€4.05
(VAT incl.)
Modelling Pigments AK Interactive ABT 502.
Out-of-StockSold out
Reference: ABTP417
€4.05
(VAT incl.)
Modelling Pigments AK Interactive ABT 502.
Reference: AK12002
€4.35
(VAT incl.)
Extra Thin Cement AK12002 40 ml.
Special square anti rolling base.Ultra-thin precision maxoma fiber brush.Special density.Glue by capillary action, quick drying.The Extra Thin Cement glues by capillary action with a...
Out-of-StockSold out
Reference: AK12015
€7.30
(VAT incl.)
Adhesive Magnet Ultra Resistant Cyanocrylate Glue AK12015 20 gr.
General-purpose cyanoacrylate 401. Fast drying, extra strong, low viscosity, specially formulated for adhesion between materials that can even have an...
Reference: AK12003
€4.35
(VAT incl.)
Plastic Cement Standard Density AK12003 40 ml.
Special square anti rolling base.Normal density and thicker maxoma fiber brush to glue.Glue by contact, quick drying.The classic modeling glue with medium drying time and...
Out-of-StockSold out
Reference: AK12001
€4.35
(VAT incl.)
Quick Cement Extra Thin AK12001 40 ml.
Special square anti rolling base.Ultra-thin precision maxoma fiber brush.Special density.Glue by capillary action, quick drying.The Quick Cement is the fastest and strongest glue...
Reference: AK2926
€11.10
(VAT incl.)
It has been a long time since Aces High run out its rst magazine in English.
We decided not to reprint them with a compilation in mind, with the best articles that have made it famous, remastered and with a fabulous...
Out-of-StockSold out
Reference: AK2938
€8.50
(VAT incl.)
See the world’s top modellers building and painting some of the most famous training aircraft.In this issue we focus on the military jet trainers, with a “vintage” touch from one of the most famous piston-engined...
Reference: AK9040
€21.60
(VAT incl.)
Two-component ultra-gloss lacquer.
Mix the lacquer and hardener in 3/1 ratio.
Contains a 60ml bottle of thinner, 60ml lacquer and the hardener and two syringes.
Get the maximum brightness in your models.
Instructions...
Reference: AK9323
€4.55
(VAT incl.)
AK 9323 Crystal Magic Glue is a perfect adhesive for transparent parts.
Its resin-based composition allows a slow and residue-free bonding of both, lenses or any part that requires clean handling and adhesion.
Its...
Out-of-StockSold out
Reference: AK FA-520
€4.70
(VAT incl.)
AK FA-520 7 Drill Bits Set 0.2 – 0.8 mm
Drill Sizes mm.:0,2 mm, 0,3 mm, 0,4 mm, 0,5 mm, 0,6 mm, 0,7 mm, 0,8 mm.
Out-of-StockSold out
Reference: AK FA-646
€4.80
(VAT incl.)
Airbrush Nozzle Reamer.
Reference: AK9181
€2.15
(VAT incl.)
1 mm x 18 m.
Flexible high-quality masking tape for precision work, making it ideal for airbrushing and designed with a firm sealing edge.
This flexibility allows you to apply curves and rounded shapes, obtaining...
Reference: AK9182
€2.40
(VAT incl.)
2 mm x 18 m.
Flexible high-quality masking tape for precision work, making it ideal for airbrushing and designed with a firm sealing edge.
This flexibility allows you to apply curves and rounded shapes, obtaining...
Reference: AK9183
€2.65
(VAT incl.)
3 mm x 18 m.
Flexible high-quality masking tape for precision work, making it ideal for airbrushing and designed with a firm sealing edge.
This flexibility allows you to apply curves and rounded shapes, obtaining...
Out-of-StockSold out
Reference: AK9184
€2.90
(VAT incl.)
6 mm x 18 m. Flexible high-quality masking tape for precision work, making it ideal for airbrushing and designed with a firm sealing edge.This flexibility allows you to apply curves and rounded shapes, obtaining a...
Reference: AK9185
€3.35
(VAT incl.)
10 mm x 18 m.
Flexible high-quality masking tape for precision work, making it ideal for airbrushing and designed with a firm sealing edge.
This flexibility allows you to apply curves and rounded shapes, obtaining...
Reference: AK011
€3.65
(VAT incl.)
AK White Spirit is perfect for blending and streaking enamel and oil based paints.
Reference: AK012
€3.65
(VAT incl.)
Create realistic dirt streaks and grime effects easily with this dirty color. This enamel product creates realistic streaking grime effects on your models. Easy to apply. Very realistic coloristic color. Shake well...
Reference: AK013
€3.65
(VAT incl.)
Rust and corrosion streaks and stains are easily produced using this reddish-brown color. Shake well before use. Apply your streak with a fine pointed brush in irregular vertical lines from upper parts on sides and...
Reference: AK014
€3.65
(VAT incl.)
Light grey color ideal for creating dirt streaks on light or white colored surfaces. Also suitable for other effects such as add chromatic richness to any piece or surface. Shake well before use. Apply your streak...
Reference: AK015
€3.65
(VAT incl.)
This is an enamel product to recreate natural dust effects. Simply apply it to your vehicle wheels, tracks and hull to achieve the most realistic effect possible. You can also mix this product with plaster if you want...
Reference: AK016
€3.65
(VAT incl.)
A product to replicate natural fresh mud. This Dark brown enamel effect is ideally suited for creating muddy surfaces. It can be also mix with plaster to create volume. Apply with a brush or airbrush and then fade...
Reference: AK017
€3.65
(VAT incl.)
An enamel product to make natural earth and mud type effects. Just apply to your vehicle wheels, tracks and hull to achieve ultra realistic earth effects. You can also mix this product with plaster to make mud with...
Reference: AK022
€3.65
(VAT incl.)
Realist color to make dust effects in vehicles of the Africa Korps, British or even modern. Light tan color is suited to creating dusty accumulations on surfaces. Apply with a brush or airbrush and then fade with a...
Reference: AK023
€3.65
(VAT incl.)
This dark earth colored effect can be used alone or mixed with other earth tones. Apply and fade with a clean brush moist with Enamel Thinner. Make your own dark mud and earth accumulations mixing this color with...
Reference: AK024
€3.65
(VAT incl.)
Darkest color in our range specifically suited for streaking effects over dark colored vehicles and surfaces. Also suitable for other effects such as add chromatic richness to any piece or surface. Shake well before...
Reference: AK025
€3.65
(VAT incl.)
The definitive mixture to make fuel spilled effects in any type of modern or classic vehicle. This is not product to make oil and grease effects. This product is good mainly to make fuel spilled effects only with a...
Reference: AK026
€3.65
(VAT incl.)
This dark green colored effect is perfect for creating fresh moss and slimy surfaces caused by dampness. Apply and fade with a clean brush moist with Enamel Thinner. Ships, boats, ports, wooden doors and many...
Reference: AK027
€3.65
(VAT incl.)
This light green colored effect is perfect for creating moss and slimy surfaces caused by dampness. Apply and fade with a clean brush moist with Enamel Thinner. Ships, boats, ports, wooden doors and many amphibious...
Reference: AK045
€3.65
(VAT incl.)
Wash dark brown indicate for green colored vehicles. The basic technique used to weather any type of model is the wash, a classic technique that is still one of the most used techniques in modelling today. Apply the...
Reference: AK046
€3.65
(VAT incl.)
D.A.K. wash for Africa Corps vehicles, also other light colored desert vehicles. Apply on details and remove excess with a clean brush moist with Enamel Thinner. A very appropriate color for desert vehicles painted...
Reference: AK047
€5.95
(VAT incl.)
AK White Spirit is perfect for blending and streaking enamel and oil based paints.
Reference: AK049
€3.60
(VAT incl.)
Our odorless turpentine is very different from our white spirit. Besides being odorless, this product is softer and less aggressive than our White Spirit. This property of the odorless thinner (Turpentine) makes it...
Out-of-StockSold out
Reference: AK050
€5.90
(VAT incl.)
Our odorless turpentine is very different from our white spirit. Besides being odorless, this product is softer and less aggressive than our White Spirit. This property of the odorless thinner (Turpentine) makes it...
Out-of-StockSold out
Reference: AK061
€10.30
(VAT incl.)
This set has three different earth colors for replicating dry, fresh and wet mud effects on your model. These colors can be mixed with plaster to give more mud volume. Mud mixtures that involve plaster are best...
Out-of-StockSold out
Reference: AK064
€10.30
(VAT incl.)
Three products from our weathering range for those who love modeling green vehicles. Great for doing streaking effects, and dark or rust colored washes.
Reference: AK065
€3.65
(VAT incl.)
Filters are designed to achieve a subtle tonal variation for especially vehicles in monotone camouflage colors. Shake and apply directly from the bottle with a moist flat brush. This filter allows us to change subtly...
Reference: AK066
€3.65
(VAT incl.)
D.A.K. wash for Africa Corps vehicles, also other light colored desert vehicles. Apply on details and remove excess with a clean brush moist with Enamel Thinner. A very appropriate color for desert vehicles painted...
Reference: AK067
€3.65
(VAT incl.)
Grimy grey colored effect ideally suited for creating streaks of dirt over sand and light colored surfaces. Also suitable for other effects such as add chromatic richness to any piece or surface. Shake well before...
Reference: AK069
€3.65
(VAT incl.)
A very special product for doing streaking grime effects over dark grey surfaces such as German vehicles painted with Panzer Grey. Also suitable for other effects such as add chromatic richness to any piece or...
Reference: AK070
€3.65
(VAT incl.)
The perfect color to give contrast to details and panels on tanks painted with Panzer Grey or any grey tone. Just mix well and use a brush to apply to details, rivets, hatches, etc. and remove excess with a clean...
Reference: AK071
€3.65
(VAT incl.)
Filters are designed to achieve a subtle tonal variation for especially vehicles in monotone camouflage colors. Shake and apply directly from the bottle with a moist flat brush. This filter allows us to change subtly...
Out-of-StockSold out
Reference: AK072
€10.30
(VAT incl.)
We have designed this set for all those modellers who love early German vehicles, or to put it another way, all those painted in Panzer Grey. The set includes all the basic products you need to do a near total...
Out-of-StockSold out
Reference: AK073
€10.30
(VAT incl.)
This weathering set was developed with modern armor enthusiasts. We have designed this special set that contains all the necessary products you need to weather any vehicle painted with the three classic NATO colors,...
Reference: AK074
€3.65
(VAT incl.)
A unique Streaking Grime effect specifically designed for vehicles painted in a tri-color camouflage scheme like those used by NATO but can be used in any vehicle. Create realistic streaks and rainmarks with this...
Out-of-StockSold out
Reference: AK075
€3.65
(VAT incl.)
The perfect dark wash for modern vehicles painted with a dark tri-color camoflage, especially NATO vehicles or dark camos. The basic technique used to weather any type of model is the wash, a classic technique that is...
Reference: AK076
€3.65
(VAT incl.)
Filters are designed to achieve a subtle tonal variation for especially vehicles in monotone camouflage colors. Shake and apply directly from the bottle with a moist flat brush. This brown filter allows us to change...