4030-04 Balancing Clear Createx (120 ml.)

Reference: 4030-04

4030 Balancing Clear

Clear, water-based urethane. Mix 10% or more with the paints. Improves flow, adhesion and durability. The original mix with Createx is transparent.

Ideal as a varnish between coats.

To work with a spray gun, 4050 UVLS Gloss Clear is recommended.

For more information see the description below.

Read more
€14.50 (VAT incl.)
Out-of-Stock
Add to compare0
Description
Description:
Liquid with a milky appearance, which when drying obtains a satin and transparent finish.
Use
1) Mix as additive
Mix with any Createx paint to create an acrylic urethane paint.
Adding 4030 to Createx paints:
Improves adhesion and wear resistance.
Improves leveling and edge retention.
Lowers surface tension allowing heavier layers without craters and improves leveling.
Reduces drying times.
4030 is generally 10% added to Createx paints.
4030 is a resin and can be added in any ratio without affecting adhesion. Adding 4030 to paint increases transparency, if necessary thin with 4011 Reducer. After mixing, wait 10 minutes for optimal spray performance.
2) Varnish between coats
4030 while not designed as a clear top coat for automotive refinish, works well as an intermediate coat for taping and masking for graphic applications.
When completely dry, 4030 is a water-resistant clear varnish that is suitable for prolonged exposure to outdoor conditions.
App
When applied as a varnish, 4030 is diluted ~ 5% with 4011 Reducer and applied in thin coats.
Apply 2-3 coats with a 50/50 overlay pattern for hole-free coverage.
Airbrush: 0.5mm ~ 25-30 psi
Gun 1.2 mm - 1.3 mm ~ 18 - 22 psi
Drying times
Estimated drying times are set at 70 ° F (21 ° C) and 50% or less relative humidity. Allow extended dry times in cooler or humid conditions. Mixing 4030 with the paint helps reduce dry times.
When used as an intercoat varnish, recoat time is approximately 10-15 minutes. After applying the last coat, the waiting time for gluing and handling is approximately 30 minutes.
The time to top coat with a final varnish should be a minimum of 60 minutes. Complete hardening is approximately 24 hours after drying.
No need to scrape before top coat with Createx paint or varnish.
Read more
Product Details
4030-04
Related products
No items

Menu

Settings